LPG

BÜTAN

  Method Min.  Max.
SP.GR.@60   ̊F ASTM D2598 To be reported  
Butane Content (Vol%) ASTM D2163    
Vap.pressure@100 F(psig) ASTM D1267 or D 2598   70
Volatile Residue:    cs& heavier(Vol%) ASTM D2163(I)   2
Corrosion Copper Strip ASTM D1838 No. 1 Strip  
Sulphur Content (WT%) ASTM 1266 or D 5453 or IP 103
0.008
Hydrogen Sulphide ASTM D2420 or IP103 Negative  
free water Visual None  
Origin: Iran- South Pars Gas Complex
Note:  When specifically required in the nomaniation, results by D 1837 will also be provided.



PROPAN



  Method Min.  Max.
SP.GR.@60   ̊F ASTM D2598 To be reported  
Propane Content (Vol%) ASTM D2163 96  
Ethane Content ASTM D2163   2
Vap.pressure@100 F(psig) ASTM D1267 or D 2598   200
Volatile Residue:    C4& heavier(Vol%) ASTM D2163(I)   2.5
Residual matter:    Resid. On evap. Of 100ml(ml)  ASTM D2158   0.05
Residual matter:    Oil stain observation(ml)  ASTM D2158 Pass(2)  
Corrosion Copper Strip ASTM D1838 or D5453 No . I Strip  
Sulphur Content (WT%) ASTM D1266   0.004
Hydrogen Sulphide ASTM D2420 or IP103 Negative  
Moisture Content ASTM D2713 or D 1744 Pass  
Origin: Iran- South Pars Gas Complex
1- When specifically required in the nomaniation, results by D 1837 will also be provided.
2- An acceptable product shall not yield a presistent oil ring when 0.3 ml of solvent residue mixture is added to a filter paper in 0.1 ml increasments and examined in
daylight after 2 minutes as described in ASTM 2158.
 

BÜTAN (LPG), Düşük Kükürt


Typical test  Unit  Specification Test Method 
ETHANE MOL % 0.08 MAX GC
PROPANE MOL % 2 MAX GC
TOTAL -C4 MOL % 97.5 MIN GC
TOTAL -C5 MOL % 0.82 MAX GC
SP.GR.@60   ̊F ………… TO BE REPORTED ASTM D2598
Corrosion Copper  ………… NO. 1 a MAX ASTM D 1838
TOTAL SULPHUR WT PPM 30 PPM MAX BASED ON ASTM D-3246
HYDROGEN SULPHIDE VOT PPM  NIL ASTM D2420/DRAGER
VAPOR PRESS @ 100    ̊F PSIG 70 MAX ASTM D2598
WATER CONTENT VOL PPM  10 MAX SHAW DEW POINT 
RESIDUE ON EVAPORATION VOL % 0.05 MAX ASTM D 2158
Origin: Middle East

PROPAN (LPG), Düşük Kükürt




Typical test  Unit  Specification Test Method 
ETHANE MOL % 0.4 MAX GC
PROPANE MOL % 98 MIN GC
BUTANE MOL % 1.4 MAX GC
PENTANES AND HEAVIER MOL % 0.01 MAX GC
Corrosion Copper  …… NO. 1 a MAX ASTM D 1838
HYDROGEN SULPHIDE VOL PPM 5 MAX ASTM D2420/DRAGER
SP.GR.@60   ̊F …… TO BE REPORTED ASTM D2598
SULPHUR(valotaile) WT PPM  30 MAX BASED ON ASTM D-3246
VAPOR PRESS @ 100    ̊F PSIA 200 MAX ASTM D2598
WATER CONTENT …… PASS ASTM D2713
Origin: Middle East